That also you can try with zap, hope he don't mind me saying this. Or
try mumbai's lamington road. Alternativ is TA7358. Yes don't forgot
to connect two back to back 4148 front end input of 602 as I did,
after seeing one of this damaged by static in GCM's handy, and it's
most sensitive ic you don't need any preamp even with rubber duckie.
73's VU3SXT
On 03/03/2011, Vignesh Kumar <vu3vga@gmail.com> wrote:
> Hi all,
> Thanks for infos. I have already known about SA602. I am searching
> it in local markets for last one month, but not available yet. So does
> anybody know the availability of this IC? or is there any other suggestions
> for direct reception?
>
> On Thu, Mar 3, 2011 at 11:02 AM, Sandeep Lohia
> <sandeeplohia12@gmail.com>wrote:
>
>>
>>
>> On 03/03/2011, Sandeep Lohia <sandeeplohia12@gmail.com> wrote:
>> > A simple SW AM reaceiver, most of them can be brought to air band,
>> > just replace PVC2J with FM gang and decrease the turns of oscilator
>> > coil mentaining the difference of 455 kcc. In totall there are three
>> > coils in single core for bandpass, oscillator and
>> > mixer/downconverter. One just needs to replace the gang and the
>> > antenna coil. However the selectivity/stability is not so good. For
>> > more professional design I saw somewhere in SMOVPO website. Adding
>> > a jfet preamp is always better it also increases sencivity. I have
>> > also seen a design somewhere by our very own VU2ZAP OM Raj, if I am
>> > not wrong. Which has also AGC stage, an advance design using SA 612
>> > but needs some alternations for VHF mostly with inducters one can
>> > understand easily, this is the best design ever seen. 73's VU3SXT
>> > message typd frm
>> > mobile phone in local train plz dnt mke issue with mistakes.
>> >
>> > On 02/03/2011, SATYAN VU3MES <satyansarath40@ovi.com> wrote:
>> >> hi
>> >>
>> >> if some one wants to listen only to airband transmission on vhf, there
>> is
>> >> a very simple way by which you can do it provided you have a decently
>> >> sensitive fm radio. the technique is to listen to the image frequency
>> >> by
>> >> peaking the IF transformers which are usually 10.7 mhz. if i want to
>> >> listen the chennai area control on 118.9 i should tune to 98.5 which is
>> >> less by double the IF frequency.
>> >>
>> >> i used to try this method long back when i was not having a proper
>> >> radio
>> >> with airband coverage. the only drawback is the coverage will be upto
>> >> 128.7 mhz and not above that.
>> >>
>> >>
>> >>
>> >> 73s de VU3MES
>> >> chennai - india - qth location website.
>> >> http://www.findu.com/cgi-bin/find.cgi?call=vu3mes
>> >> http://www.qrz.com/callsign/vu3mes
>> >> http://www.satyansarath.param.mobi [mobile web page]
>> >>
>> >>
>> >>
>> >> ----- Original message -----
>> >> From: "Raj‎" <vu2zap@gmail.com>
>> >> To: HamBrewers@yahoogroups.com
>> >> Subject: RE: [HamBrewers] Air Band Receiver
>> >> Date: Wed, 02 Mar 2011 20:39:26 +0530
>> >>
>> >>
>> >>
>> >> A regen Rx with a front end pre-amp is quite OK. This stage blocks the
>> >> regen oscillation.
>> >>
>> >>
>> >> SA602/612 NE602/612 Etc.
>> >>
>> >>
>> >>
>> >> I once constructed Tony Van RoonÂ's rx and it worked. Apart from that
>> >> I have built couple of Regen Rxs – they tend to receive all
>> >> conversations simultaneously. Also, they are very dangerous because
>> >> they radiate via the antenna causing QRM and should not be used
>> >> anywhere near Airport – they can cause serious qrm to aircrafts in
>> >> range also.
>> >>
>> >>
>> >>
>> >> Rajesh K
>> >>
>> >> KC2KBY/VU3RGK
>> >>
>> >>
>> >>
>> >> -----Original Message-----
>> >> From: HamBrewers@yahoogroups.com [mailto:HamBrewers@yahoogroups.com]On
>> >> Behalf Of Vignesh Kumar
>> >> Sent: Wednesday, March 02, 2011 9:18 AM
>> >> To: HamBrewers@yahoogroups.com
>> >> Subject: [HamBrewers] Air Band Receiver
>> >>
>> >>
>> >>
>> >>
>> >> Hello Friends,
>> >>
>> >> I want to build a Simple Air Band Receiver. Can
>> >> anybody suggest AM receiver ICs for VHF band?
>> >>
>> >>
>> >>
>> >> --
>> >> Raj, VU2ZAP
>> >> Bangalore, India.
>> >>
>> >>
>> >>
>> >> ----------------------------------------------------------
>> >> Ovi Mail: Making email access easy
>> >> http://mail.ovi.com
>> >>
>> >>
>> >
>>
>>
>
>
>
> --
> Vignesh
> VU3VGA
> +919787379828
>
No comments:
Post a Comment