Ham Radio Homebrew Informations: RE: [HamBrewers] RE: Ham brewers are you there?

Tuesday, May 31, 2011

RE: [HamBrewers] RE: Ham brewers are you there?

Dear Paddy,

thank you for the reply,

yes you are right

first we will start do this 2Meter receiver and then we can do a 40/20Meter RX one bye one.

we have lot of time and lot of projects.

Whoever intrested in the first project can do them, others can contribute on to the next project.

the target design of this project will be less than 2K (Iam not sure abt exact cost till final working board is made)

73,
N.Ganesan

NOTE: SUGGESTIONS,COMMENTS,FEEDBACKS ARE WELCOME TO KEEP THIS GROUP ACTIVE .

To: HamBrewers@yahoogroups.com
From: PEPINDIA@yahoo.com
Date: Tue, 31 May 2011 09:35:08 -0700
Subject: Re: [HamBrewers] RE: Ham brewers are you there?

Well Ganesan, with the advent of cheap Chinese handies available in the 2-3 k bracket, is it worth making a 2 m receiver, which will cost 2k+?

A hf rx for 40 or 20m or a cheap DSB trx for 40m will bring in interested home-brewers.

73,s

Paddy

vu2pep

--- On Tue, 5/31/11, kumar gautam <fromgautam@yahoo.co.in> wrote:

From: kumar gautam <fromgautam@yahoo.co.in>
Subject: Re: [HamBrewers] RE: Ham brewers are you there?
To: HamBrewers@yahoogroups.com
Date: Tuesday, May 31, 2011, 8:50 PM

Hi,

I am also interested in this project.

I am also requesting VU2ZAP to give his thought in this regard.

with 73's

de VU2GAQ

Kumar Gautam

Ex- VU3KGL

--- On Tue, 31/5/11, Namachivayam Ganesan <ganesan4u@hotmail.com> wrote:

From: Namachivayam Ganesan <ganesan4u@hotmail.com>
Subject: [HamBrewers] RE: Ham brewers are you there?
To: "hambrewrs" <hambrewers@yahoogroups.com>
Date: Tuesday, 31 May, 2011, 8:45 PM

Dear friends and OM,

i had seen this group inactive for couple of months.

as interest regarding Ham brewers gone down???????

are everybody busy???????

I wish to make this group a active one ,share the knowledge,do projects as DIY.

FIRST OF THE THING LET WE DO A SIMPLE 2METER VHF RECEIVER WITH SPEC AS

Specifications of the proposed receiver are:

Mosfet based front end LNA

144-146 MHz tuning range

LCD display of frequency and signal strength

Rotary encoder for tuning

Selectable tuning step size (5, 10, 100 kHz and 1 MHz)

PLL synthesized tuning

Full microcontroller controlled band scanning capability

Dual conversion superhetrodyne (10.7 MHz and 455 kHz) with Crystal and Ceramic IF filtering

Squelch function

Volume control and audio amplifier / speaker built in.

WITH GREAT EXPERIENCE AND KNOWLEDGE VU2ZAP CAN HELP US.

LET WE START THE PROJECT?????

Ready???

73,
N.Ganesan