| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (1) |
Hello All
We acknowledge the overwhelming response for all your inclination & interest to be part of this RSB Silver Jubilee meet
Specially those Old timers & out station Hams from TN , Kerala, Andhra, who travelled all the way to be part of this Celebration
Numerous Thank you messages has been posted on various egroups, Facebook , SMS'es Phone calls etc from all, has indicated that everyone who participated
enjoyed the RSB Silver Jubilee Meet and did not have anything to lose but gain by building friendships, reconnected with those old lost friends.
Eyeball, Eyeball, Eyeball was the main agenda
That’s exactly why we had no stage or dias for VIPs etc to sit and bore us all with long speeches, no tech talks,etc,
We had no honouring, felicitation, handing of bouquets or rose buds, certificates, we don’t pat our own backs unlike in other functions etc
Precious Time for Eyeball was important
"Short & Sweet Agenda ", as a few mentioned
We had the invocation by Hams VU3HBM Deepa & VU3IET Jyothi,
short Welcome address by VU2RKC Pres,
followed by a Story telling by VU2ZAP on how RSB came to be formed etc
A very brief talk by VU2GMN Gopal Pres of ARSI about the IARU and WPC band plans etc
VU2KKZ Raja gave some brief hilarious introduction of the RSB members which was enjoyed by all.
A brief talk DX ham YT7MPB
RF break as it was most awaited by many followed by lunch buffet
After lunch again it was only eyeball, eyeball, eyeball & chit chat etc
Vote of Thanks was by VU2DKV Dash and old timer and non member of RSB
Photography by many, with elaborate photography by VU3DON Singh, please kindly forward me your albums as we plan to combine everything into a DVD for circulation.
On behalf of Repeater Society of Bangalore we wish to thank each one of you for the making this event a grand success with Eyeball and Fellowship
on all counts mentioned.
You have all maintained the dignity and decorum of the Century Club by following the dress code and by conducting ourselves with dignity & respect, not disturbing the Century club activities
Some were skeptical about us opening the RF counter by 11.30 am, but you have all enjoyed the RF, eyeball & fellowship with dignity & respect.
Gods too showered their devine blessings with some rains towards the close of the programme.
Thank you GOD
We thank VU3BLR Vathsa ( member of Century Club ) being kind & courageous enough to arrange Halls and facilities at the CC.
He has expressed his sincere thanks to all participants in upholding the dignity & decorum of CC.
Wish to thank all those who co-ordinated for the RSB meet
VU2QNY Ismail our Net Controller
VU2DPE, VU2GUR, VU3BYD, VU3DON,
VU2TKO, VU3PRH , VU3BLR, VU2PGH, VU3SGX
We also thank all those who contributed graciously towards the RSB projects current & future
Please make all contributions by DD / Chq favoring " Repeater Society of Bangalore "
My sincere thanks to RSB members and especially the following
VU2ZAP Raj
VU2GGM Poru
VU2KKZ Raja
VU2YZ Sampath
VU2LU Ramesh
VU2SF Sangu
VU2CAP Shankar
who reposed all trust & faith in me when I proposed for an RSB Silver Jubilee meet
Finally from the bottom of my heart to all who participated & made this event a heart warming grand success
" A VERY HEARTY THANK YOU ALL"
Best 73
Pop
VU2POP
Dear ZAP,
lost your contact as misplaced my cell, plzz cal me on 8697484159 or
8013454211 whenever free...
---VU3SXT
On 16/10/2012, Namachivayam Ganesan <ganesan4u@hotmail.com> wrote:
>
> Dear friends,
> thank you ZAP,thank you friends
> thank you very much for your encouragement
>
> this will force me to do better and more
> 73,N.GanesanKJ6LRR09363105352CoimbatoreTamil NaduIndia
> To: HamBrewers@yahoogroups.com
> From: mukundamoni@yahoo.co.in
> Date: Tue, 16 Oct 2012 00:09:38 +0800
> Subject: Re: [HamBrewers] RE: 40M SSB/CW Receiver
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> WHEN WORDS OF APPRECIATION COMES FROM GRAND MASTERS LIKE RAJ, GANESAN
> U CAN BE REALLY BE PROUD OF THE QUALITY WORKLOOKING FORWARD TO THE KIT
> VENU, VU2MVX
>
> --- On Mon, 15/10/12, Raj <vu2zap@gmail.com> wrote:
>
> From: Raj <vu2zap@gmail.com>
> Subject: Re: [HamBrewers] RE: 40M SSB/CW Receiver
> To: HamBrewers@yahoogroups.com
> Date: Monday, 15 October, 2012, 6:46 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Thanks for bringing the board to our VU2RSB silver jubilee eyeball
> Ganeshan.
>
> Great job and very professional work. Please make it into a kit available
> to
>
> all the hambrewers to build and have fun!
>
>
> Folks, Ganeshan has also designed and built cube sat modules and as
> his
>
> signature work they are very professional! A transceiver kit will be
> great!
>
>
> Cheers
>
> Raj, vu2zap
>
>
> At 12-10-2012, you wrote:
>
>
>
>
> Dear OMs, SWLs.
>
>
>
> Herewith attached link for my current project 40M SSB/CW
> Receiver
>
>
>
> http://homebrewcorner.blogspot.in/p/lrr40.html
>
>
> Waiting for cabinet and IFTs for large production.
>
>
> 73,
>
> N.Ganesan
>
> 09363105352
>
> Coimbatore
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
| WHEN WORDS OF APPRECIATION COMES FROM GRAND MASTERS LIKE RAJ, GANESAN U CAN BE REALLY BE PROUD OF THE QUALITY WORK LOOKING FORWARD TO THE KIT VENU, VU2MVX --- On Mon, 15/10/12, Raj <vu2zap@gmail.com> wrote:
|
| WHEN WORDS OF APPRECIATION COMES FROM GRAND MASTERS LIKE RAJ, GANESAN U CAN BE REALLY BE PROUD OF THE QUALITY WORK LOOKING FORWARD TO THE KIT VENU, VU2MVX --- On Mon, 15/10/12, Raj <vu2zap@gmail.com> wrote:
|
Hi Ganeshan,
Split Winding 10.7 IFT cores from ROSY-Delhi with five slots are good,
gives more Q, if not with metal dust core...
For large production you also need to look at price...
http://rosyelectronics.com/
"Mr. Neeraj Bharara
ROSY ELECTRONICS PVT. LTD.
J-4/12, Rajouri Garden
New Delhi-110027
Tel: +91-(11)- 25107642, 25107645
Fax: +91-(11)- 25436754"
Regards VU3SXT...
>Dear OMs, SWLs.
>Herewith attached link for my current project 40M SSB/CW Receiver
>http://homebrewcorner.blogspot.in/p/lrr40.html
>Waiting for cabinet and IFTs for large production.
On 15/10/2012, Raj <vu2zap@gmail.com> wrote:
> Thanks for bringing the board to our VU2RSB silver jubilee eyeball
> Ganeshan.
> Great job and very professional work. Please make it into a kit available
> to
> all the hambrewers to build and have fun!
>
> Folks, Ganeshan has also designed and built cube sat modules and as his
> signature work they are very professional! A transceiver kit will be great!
>
> Cheers
> Raj, vu2zap
>
> At 12-10-2012, you wrote:
>>
>>
>>Dear OMs, SWLs.
>>
>>Herewith attached link for my current project 40M SSB/CW Receiver
>>
>><http://homebrewcorner.blogspot.in/p/lrr40.html>http://homebrewcorner.blogspot.in/p/lrr40.html
>>
>>Waiting for cabinet and IFTs for large production.
>>
>>73,
>>N.Ganesan
>>09363105352
>>Coimbatore
>
Thanks for bringing the board to our VU2RSB silver jubilee eyeball Ganeshan.
Great job and very professional work. Please make it into a kit available to
all the hambrewers to build and have fun!
Folks, Ganeshan has also designed and built cube sat modules and as his
signature work they are very professional! A transceiver kit will be great!
Cheers
Raj, vu2zap
At 12-10-2012, you wrote:
Dear OMs, SWLs.
Herewith attached link for my current project 40M SSB/CW Receiver
http://homebrewcorner.blogspot.in/p/lrr40.html
Waiting for cabinet and IFTs for large production.
73,
N.Ganesan
09363105352
Coimbatore
I think I shall use ti's CCS, to start with.
Need to login to download the installation files from the ti site. I
have the login details for ti.com written down somewhere - it is quite
some time since I had visited their site, and I changed computers
since then.
For a start, I intend to drive a graphical LCD with it just to get
familiar with the programming environment.
On 10/15/12, Yannick (XV4Y) <yannick.devos@online.fr> wrote:
> Hi,
>
> Nice to hear. What IDE are you planning to use ?
> I am still waiting for mine...
>
> Now I am making my WSPR beacon code clean so I can publish it...
>
> 73,
> Yan.
> ---
> Yannick DEVOS - XV4Y
> http://xv4y.radioclub.asia/
> http://varc.radioclub.asia/
> http://www.qslwatch.com/
>
> Le 15 oct. 2012 à 14:36, S Chandra Sekhar, PWD a écrit :
>
>> On 10/2/12, Yannick (XV4Y) <yannick.devos@online.fr> wrote:
>>> Dear HAMbrewers,
>>>
>>> Texas Instruments is offering the Stellaris LaunchPad (short StellarPad)
>>> which features a powerfull Cortex M4F micro-controller (32b, 80MHw, 256k
>>> Flash, 16Ko SRAM, 2Ko EEPROM...) for only 5 USD shipping included.
>>> This is a great deal if you like to play with embedded computing.
>>> The Energia IDE (an Arduino fork) is currently being ported to this
>>> architecture...
>>>
>>> http://www.ti.com/tool/ek-lm4f120xl#buy
>>>
>>> 73,
>>> Yan.
>>> ---
>>> Yannick DEVOS - XV4Y
>>> http://xv4y.radioclub.asia/
>>> http://varc.radioclub.asia/
>>> http://www.qslwatch.com/
>>>
>>>
>> I ordered two from Element14 india as soon as I saw this mail. Cost me
>> around Rs. 1200 for two including shipping. They arrived today.
>> Plugged one into the USB with the included cable and there is an RGB
>> led drive demo programmed in. It works.
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>
>
Hi,
Nice to hear. What IDE are you planning to use ?
I am still waiting for mine...
Now I am making my WSPR beacon code clean so I can publish it...
73,
Yan.
---
Yannick DEVOS - XV4Y
http://xv4y.radioclub.asia/
http://varc.radioclub.asia/
http://www.qslwatch.com/
Le 15 oct. 2012 à 14:36, S Chandra Sekhar, PWD a écrit :
> On 10/2/12, Yannick (XV4Y) <yannick.devos@online.fr> wrote:
>> Dear HAMbrewers,
>>
>> Texas Instruments is offering the Stellaris LaunchPad (short StellarPad)
>> which features a powerfull Cortex M4F micro-controller (32b, 80MHw, 256k
>> Flash, 16Ko SRAM, 2Ko EEPROM...) for only 5 USD shipping included.
>> This is a great deal if you like to play with embedded computing.
>> The Energia IDE (an Arduino fork) is currently being ported to this
>> architecture...
>>
>> http://www.ti.com/tool/ek-lm4f120xl#buy
>>
>> 73,
>> Yan.
>> ---
>> Yannick DEVOS - XV4Y
>> http://xv4y.radioclub.asia/
>> http://varc.radioclub.asia/
>> http://www.qslwatch.com/
>>
>>
> I ordered two from Element14 india as soon as I saw this mail. Cost me
> around Rs. 1200 for two including shipping. They arrived today.
> Plugged one into the USB with the included cable and there is an RGB
> led drive demo programmed in. It works.
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
On 10/2/12, Yannick (XV4Y) <yannick.devos@online.fr> wrote:
> Dear HAMbrewers,
>
> Texas Instruments is offering the Stellaris LaunchPad (short StellarPad)
> which features a powerfull Cortex M4F micro-controller (32b, 80MHw, 256k
> Flash, 16Ko SRAM, 2Ko EEPROM...) for only 5 USD shipping included.
> This is a great deal if you like to play with embedded computing.
> The Energia IDE (an Arduino fork) is currently being ported to this
> architecture...
>
> http://www.ti.com/tool/ek-lm4f120xl#buy
>
> 73,
> Yan.
> ---
> Yannick DEVOS - XV4Y
> http://xv4y.radioclub.asia/
> http://varc.radioclub.asia/
> http://www.qslwatch.com/
>
>
I ordered two from Element14 india as soon as I saw this mail. Cost me
around Rs. 1200 for two including shipping. They arrived today.
Plugged one into the USB with the included cable and there is an RGB
led drive demo programmed in. It works.
| And who is the Brit agent for this and the others? 73 de Gareth G4SDW --- On Sat, 13/10/12, Yannick DEVOS (XV4Y) <yannick.devos@online.fr> wrote:
|
