Ham Radio Homebrew Informations: Re: [HamBrewers] RE: Ham brewers are you there?

Dear Paddy and others,

As part of internship program a batch of Aero-space students are doing a course of ASOC in NIAR Hyderabad and they have to do a practical job/work also and hence I was involvedin Conducting a workshop on JOTA RX -40 for all the guies/girls and ......

The usual duration of threedays so that slow / medium students also can finish their kit! From the last Friday afternoon session! Saturday also was a halfday session and 70% of them finished on Saturday itself!

Balance were completed on the thirdday before Lunch! So, that they get ample time to use their RX on air and monitor stations !

And they have monitored in those two days more than twenty countries including Hawaii Islands( I understand Hawaii is close to the Promised Land!, don't know for sure as I still do not have a passport!)

Best regards and thanks for asking!

72, dev

From: padmanabhan cattamanchi <PEPINDIA@yahoo.com>
To: HamBrewers@yahoogroups.com
Sent: Wed, June 1, 2011 11:38:23 AM
Subject: Re: [HamBrewers] RE: Ham brewers are you there?

HI Prabhu,

When and where was this ?

Paddy

vu2pep

--- On Wed, 6/1/11, Dev Ramaprabhu <vu2dev@yahoo.com> wrote:

From: Dev Ramaprabhu <vu2dev@yahoo.com>
Subject: Re: [HamBrewers] RE: Ham brewers are you there?
To: HamBrewers@yahoogroups.com
Date: Wednesday, June 1, 2011, 10:54 AM

Dear Paddy,

Just back from Hyderabad after successfully conducting 40 Mtr RX workshop.

When you mentioned a cheap HF rx couldnot hold this info!

Best regards,

dev

From: padmanabhan cattamanchi <PEPINDIA@yahoo.com>
To: HamBrewers@yahoogroups.com
Sent: Tue, May 31, 2011 10:05:08 PM
Subject: Re: [HamBrewers] RE: Ham brewers are you there?

Well Ganesan, with the advent of cheap Chinese handies available in the 2-3 k bracket, is it worth making a 2 m receiver, which will cost 2k+?
A hf rx for 40 or 20m or a cheap DSB trx for 40m will bring in interested home-brewers.

73,s

Paddy

vu2pep

--- On Tue, 5/31/11, kumar gautam <fromgautam@yahoo.co.in> wrote:

From: kumar gautam <fromgautam@yahoo.co.in>
Subject: Re: [HamBrewers] RE: Ham brewers are you there?
To: HamBrewers@yahoogroups.com
Date: Tuesday, May 31, 2011, 8:50 PM

Hi,

I am also interested in this project.

I am also requesting VU2ZAP to give his thought in this regard.

with 73's

de VU2GAQ

Kumar Gautam

Ex- VU3KGL

--- On Tue, 31/5/11, Namachivayam Ganesan <ganesan4u@hotmail.com> wrote:

From: Namachivayam Ganesan <ganesan4u@hotmail.com>
Subject: [HamBrewers] RE: Ham brewers are you there?
To: "hambrewrs" <hambrewers@yahoogroups.com>
Date: Tuesday, 31 May, 2011, 8:45 PM

Dear friends and OM,

i had seen this group inactive for couple of months.

as interest regarding Ham brewers gone down???????

are everybody busy???????

I wish to make this group a active one ,share the knowledge,do projects as DIY.

FIRST OF THE THING LET WE DO A SIMPLE 2METER VHF RECEIVER WITH SPEC AS

Specifications of the proposed receiver are:

Mosfet based front end LNA

144-146 MHz tuning range

LCD display of frequency and signal strength

Rotary encoder for tuning

Selectable tuning step size (5, 10, 100 kHz and 1 MHz)

PLL synthesized tuning

Full microcontroller controlled band scanning capability

Dual conversion superhetrodyne (10.7 MHz and 455 kHz) with Crystal and Ceramic IF filtering

Squelch function

Volume control and audio amplifier / speaker built in.

WITH GREAT EXPERIENCE AND KNOWLEDGE VU2ZAP CAN HELP US.

LET WE START THE PROJECT?????

Ready???

73,
N.Ganesan